Build a 10x10 Challenge Board DIY Kit in 5 Steps
By The Broken Token | Board Game Organizers & Accessories | Published: 2026-10-26
Category: How-to Guides
Assemble your own board game challenge tracker with this DIY kit. Follow these steps to build a durable display for the 10x10 gaming tradition.
Quick Answer
Assemble the 10x10 Challenge Board DIY Kit by punching out pieces, dry-fitting the frame, applying wood glue, and clamping until set.
Why the 10x10 Challenge Board Is Worth Building
The 10x10 Challenge Board turns the annual gaming tradition into a physical display. Instead of tracking plays on a spreadsheet, you build a wooden grid that shows 10 games, each played 10 times. The DIY kit lets you customize the board's finish, and assembling it yourself gives you confidence in its durability. The trade-off is that you need a few extra tools (wood glue, clamps) and about an hour of focused work.
How to Build Your 10x10 Challenge Board
- Punch Out All Pieces: Carefully remove every wooden piece from the kit's frame. Use a small file or sandpaper to smooth any rough edges. Common mistake: tearing the thin connector tabs, which can leave splinters. Check that all pieces are free of debris before proceeding.
- Dry-Fit the Frame: Assemble the outer frame and the inner grid without glue. Confirm that each slot and tab aligns correctly. Common mistake: forcing a piece into the wrong slot, which can crack the wood. If any piece doesn't fit, sand the tab slightly until it slides in smoothly.
- Apply Wood Glue to Joints: Disassemble the dry-fit pieces in sections. Apply a thin layer of wood glue to each tab, then reassemble. Wipe away excess glue with a damp cloth immediately. Common mistake: using too much glue, which creates messy squeeze-out and weakens joints. A thin, even coat is stronger than a thick bead.
- Clamp and Let Set: Use spring clamps or rubber bands to hold the board together while the glue dries. Let it cure for at least 30 minutes before handling. Common mistake: moving the board too soon, causing joints to shift. For best results, let the glue cure overnight.
- Add Your Game Tokens: Once the glue is fully dry, place the included tokens or your own game pieces into the grid slots to track plays. Common mistake: inserting tokens before the glue cures, which can warp the slots. Use the board as a centerpiece for your game shelf to celebrate your progress.
Product Details
- 10x10 Challenge Board - DIY Kit: 10 games, 10 times each. Can you play 100 games? It has become a gaming tradition to start the calendar year with a 10x10 challenge. The kit's grid layout directly supports the challenge format, giving you a visual progress tracker for each game.
10x10 Challenge Board - DIY Kit
