Using Slip Guard Strips to Protect Card Cases
By The Broken Token | Board Game Organizers & Accessories | Published: 2026-10-27
Category: Tips & Care
Learn how to use BCW Slip Guard Strips to stop cards from sliding in your card cases, keep them upright, and protect your collection with this simple storage hack.
Quick Answer
Use a BCW Slip Guard Strip to line the bottom of your card storage rows, creating a non-slip surface that keeps cards upright and prevents sliding damage.
Why Slip Guard Strips Matter for Card Protection
When cards are stored vertically in card cases or boxes, they can slide forward or lean, causing bent corners and edge wear. A simple foam strip at the bottom of each row adds friction, keeping your cards in place even when the case is moved or transported.
The Slip Guard Strip is specifically designed for BCW Card Bins, Card Catalogs, and Card Storage Boxes, but you can cut it to fit most card cases with a flat bottom. It's a low-cost, low-effort upgrade that protects high-value cards from unnecessary damage.
Trade-Offs and Limitations
The strip adds a thin layer at the bottom of each row, which slightly reduces the usable height. For most standard card sizes, this is negligible, but if you're storing cards in top-loaders or thick sleeves, test the fit before committing.
The strip is black foam, so it's not visible once cards are in place. However, if you frequently remove and replace cards, the adhesive (if any) may wear over time. The strip can be cut to any length, so you can replace sections as needed.
How to Install a Slip Guard Strip
- Measure your card case rows: Use a ruler or tape measure to determine the length of each row where you'll place the strip. The Slip Guard Strip comes in an 8-foot length, so you can cut it to fit multiple rows. Measure twice, cut once – avoid wasting strip material.
- Cut the strip to size: Using scissors or a craft knife, cut the foam strip to the measured length. A straight cut ensures a snug fit at the bottom of the row. Make sure the cut edge is smooth to avoid snagging card sleeves.
- Place the strip at the bottom of the row: Lay the strip flat along the bottom of the card case row, ensuring it covers the full length. Press down gently to secure it in place. Check that the strip lies flat – any bumps can cause cards to tilt.
- Load your cards vertically: Place your cards into the row, pressing them gently against the strip. The foam creates friction to keep them upright and prevent sliding. Don't overfill the row – leave a little room to avoid pressure on the cards.
- Test and adjust: Gently tilt the card case to see if any cards slide. If they do, reposition the strip or add a second layer for extra grip. A quick shake test can save you from future card damage.
Product Facts
- Slip Guard Strip: The BCW Slip Guard Strip is a black foam strip that adds a non-slip surface to the bottom of each row in vertical storage containers. This prevents cards from sliding and keeps them upright, reducing the risk of bent corners and edge damage.
Slip Guard Strip
